Zeolite wheel adsorption device

Zeolite's main components are: silicon, aluminum, with adsorption capacity, can be used as an adsorbent; zeolite wheel is the use of zeolite specific pore size has the characteristics of adsorption, desorption capacity of organic pollutants, so that the original has a large amount of wind, low concentration The VOCs exhaust gas is condensed and converted into small air volume and high concentration gas through the zeolite wheel, which can reduce the operating cost of the back-end final treatment equipment.

Rotary Adsorption and Purification Device—Adsorption and concentration of organic gases using solid adsorption beds. The two sides of the rotor are divided into three zones by special sealing devices: adsorption zone, desorption zone and cooling zone. After pretreatment filtration, the exhaust gas after paint mist, dust and water vapor is removed, and the bed is rotated through the slow-rotary zeolite molecular sieve, and the exhaust gas evenly passes through the cross-section of the rotating bed. Because of the adsorption capacity of the zeolite molecular sieve, organic exhaust molecules pass through the zeolite. The runner will achieve the purpose of removing organic matter by adsorption after a certain residence time; in the regeneration area, the runner enters the regeneration zone and the organic matter adsorbed on the runner is desorbed from the zeolite under the action of hot air, and the volatile matter is sent to The desorption system is processed to realize regeneration, and the regeneration can be re-adsorbed after cooling. With the continuous rotation of the runner, adsorption, desorption, and cooling cycles are performed to ensure continuous and stable operation of the exhaust gas treatment.