Explosion-proof dust collector structure design and cleaning method

Explosion-proof dust collector structural design is directly adopting its measure body structure. Such a special design can effectively prevent the accumulation of dust in combustible dust in the internal components of the explosion-proof dust collector. The partition plates and beam partitions in the equipment are all Need to do a good job set its dust board.

The degree of inclination of the dust-proof plate in the explosion-proof dust collector is not less than 70 degrees, which can effectively prevent the phenomenon that the angle between the two bucket walls is too small, resulting in the accumulation of ash. The adjacent side plates need to be effective. The slip plate is welded so that dust deposition can be eliminated.

Explosion-proof dust collector will not operate normally or because the dust will be blocked when the humidity of the treated dust is high. When the dust is in design, the wall board will increase the steam tube insulation or tubular electric heating to the high-temperature dust collector. So that it can effectively prevent its hopper material.

The interior of the explosion-proof dust collector needs to use its anti-static filter bag, mainly because its high concentration of dust will directly rub against each other during the process of use, so that the dust will directly rub against the filter cloth effectively. Generate its static electricity.

The accumulation of static electricity will directly produce its spark, which will directly lead to combustion. For the method of cleaning the equipment, the filter bag is made of polyester needle felt, so that it can effectively eliminate the static electricity, and the fabric of the filter bag will be directly Spun into a conductive wire or carbon fiber.

When the filter bag is installed in the explosion-proof dust collector, the filter bag is mainly connected through its porous plate and steel skeleton, and then directly through its shell and connected to the workshop grounding net, so that it is used for the filter bag of the anti-air blast cleaning. The effect is very good.