PP washing tower

PP washing tower is a new type of industrial waste gas treatment and processing equipment. It is produced on the basis of industrial floating gas purifiers with floating filler layers. It is widely used in industrial exhaust gas treatment, dust removal and other aspects of pre-treatment, purification effect is very good, is the most commonly used and most practical in acid-alkali waste gas treatment. a processing device. The PP washing tower produced by our company is different from the existing washing tower on the market. It is made from the lightest polypropylene among plastics, namely PP material. The washing tower produced by our company is mainly divided into two kinds: Towers and cyclone towers, while packed towers are relatively widely used, and when there is more dust in the exhaust gas, cyclone towers can be used. The PP scrubber has the advantages of simple structure, low energy consumption, and high purification efficiency, and can effectively remove hydrogen chloride gas (HCl), hydrogen fluoride gas (HF), ammonia gas (NH3), sulfuric acid mist (H2SO4), and chromic acid mist (CrO3). Water-soluble gases such as HCN, H2S, H2S, and HCHO. The acid mist exhaust gas is introduced into the purification tower by the air duct. After passing through the packing layer, the exhaust gas and the sodium hydroxide absorbing solution are in full contact with the liquid and liquid phases to absorb the neutralization reaction. After the acid mist exhaust gas is purified, the demisting plate is dehydrated and defogged. The fan discharges into the atmosphere. The absorption liquid is sprayed on the top of the tower after being pressurized by the water pump at the bottom of the tower and finally returned to the bottom of the tower for recycling. Purified acid mist exhaust gas reaches the national emission standards.